Read or decode a QR code from camera or image

Use your camera, drop an image, paste a screenshot, or pick a file. It is decoded on your device, and links are shown before you decide to open them.

LOCAL QR SCANNERDrop an image here

or paste a screenshot with Ctrl+V / ⌘V

How to read a QR code with your camera or from an image

Tap Use camera and point it at the code, or drop an image above, paste a screenshot, or choose a file. QR Polish decodes it on your device and shows what it says. Links are never opened for you.

If nothing is found, crop closer to the code, use a higher-resolution image, or make sure the whole code is visible.

Check whether your QR code scans

Designed a code with a logo or colors? Upload the image above to see if it still decodes. If it fails, try higher contrast, a smaller logo, or square dots, then test again.

For a deeper check, build the code on the Create page, where an automatic polish check re-scans it under four tough conditions and fixes common problems.

How can I test if my QR code works?

Upload the image on this page. If it decodes and shows the right content, most phones will read it too. For print, photograph the actual printed size and test that photo.

Why does my QR code not scan?

The usual causes are low contrast, a light-on-dark (inverted) design, a logo covering too much of the code, or blur. Rebuild it with dark modules on a light background, keep any logo under 30% of the code area, and test again here.

Does passing this test guarantee every phone can scan it?

It is a strong signal but not a guarantee, because phone cameras differ. Before printing, test with at least one real phone.